You must comprehend the essential details that define the mesh in order to read the welded wire mesh size. These requirements usually consist of the overall sheet or roll size, the wire diameter (gauge), and the mesh opening size. Here’s how to understand every one of these components:
1. Mesh Opening Size (Aperture Size):
This is the distance in mesh units between two neighboring wires.
Note: The size of the mesh hole is sometimes expressed in millimeters or inches.
For instance, if the mesh is marked “2×2 inches,” it indicates that there are square holes of 2 inches by 2 inches between the wires.
2. Wire Diameter (Gauge):
Defined as the wire’s thickness in the mesh. Typically, gauge numbers or millimeters are used to indicate the wire diameter.
System of Gauges: A thicker wire is indicated by a smaller gauge number in the American Wire Gauge (AWG) standard. In comparison to 14-gauge wire, 12-gauge wire is thicker.
Note: The mesh size and gauge are frequently given together.
For instance, if the mesh is marked “12 gauge,” it indicates that 12-gauge thick wire was utilized to create it.
American Wire Gauge (AWG) to Millimeters (mm) Conversion:
| Gauge (AWG) | Diameter (mm) |
|---|---|
| 4 | 5.19 mm |
| 6 | 4.11 mm |
| 8 | 3.26 mm |
| 10 | 2.59 mm |
| 12 | 2.05 mm |
| 14 | 1.63 mm |
| 16 | 1.29 mm |
| 18 | 1.02 mm |
| 20 | 0.81 mm |
| 22 | 0.64 mm |
| 24 | 0.51 mm |
| 26 | 0.40 mm |
| 28 | 0.32 mm |
| 30 | 0.25 mm |
| 32 | 0.20 mm |
| 34 | 0.16 mm |
| 36 | 0.13 mm |
3. Total Welded Wire mesh Sheet or wire mesh Roll Size:
Described as the overall measurements of the mesh sheet or roll.
Notation: Usually expressed in meters or feet.
In the event that the mesh sheet is marked “4 feet x 8 feet,” for instance, it indicates that it is 4 feet wide and 8 feet long.
4. Note on Mesh Size:
Standard Format: The mesh size is usually mentioned first, followed by the sheet or roll size, as a combination of the mesh opening size and the wire gauge.
An example of a mesh with the specifications “2 x 2 inches, 12 gauge, 4 ft x 8 ft” is:
Dimensions of Mesh Opening: 2 inches by 2 inches.
Twelve gauge wire is used.
Sheet dimensions: 4 feet long by 8 feet broad.
Sometimes,in order to load more in a cotainer,we will make the mesh size to meet the container size.
For example:20ft container,inner length is 6 meter,wideth 2.35 meter,we will make the mesh in 5.8X2.3m or 2.9X2.3m
5. Additional Information:
Center-to-Center Measurement: Occasionally, rather than the clear opening size, the mesh size may be reported based on the center-to-center distance between wires. The term “2×2 inches” could, for instance, describe the separation between the centers of two wires.
Gauge Substitutes: Instead of utilizing the gauge system, wire diameter may be provided directly in millimeters in some places.
How to Interpret a Mesh Size:
When a label reads “2 x 4 inches, 14 gauge, 3 feet x 100 feet,” it indicates:
Mesh Opening Dimensions: The holes measure 2 inches in width and 4 inches in height.
Wire Diameter: A 14 gauge wire is utilized.
The roll measures three feet in width and one hundred feet in length.
Knowing these factors can help you choose the appropriate welded wire mesh for industrial, construction, or fencing applications.
What kind of welded wire mesh we can supply?
